THE CHALLENGE

Extraction systems for oil mist and aerosols

Oil mists and fumes are generated when pure oil is used as a cutting fluid on machine tools. Depending on the cutting speed, feed rate and cutting depth, this may produce only a mist or a mixture of mist and fumes. If a mixture of oil and water or water and a chemical additive is used as a cutting fluid, the mists generated must not be confused with the mists arising from pure oil.

Hazards from oil and aerosol mists

Oil mists spread quickly in the indoor air, are deposited everywhere and contaminate surfaces (workbenches, walls, ceilings, cabinets and floors). They are a safety hazard (slip hazard), cause general discomfort among employees and, depending on the composition, can even be hazardous to their health.

It is therefore absolutely necessary to extract and filter these mists before they spread everywhere. Both individual machine extraction and group extraction units with mechanical air cleaners can stop the indoor air being contaminated with mists.

Challenges in extracting oil mists

One special characteristic of oil mist is that it consists of large amounts of aerosols and microparticles of water. This causes very high humidity in the room even if the mist is separated. Oil mist further contains a significant amount of gas which cannot be extracted either with mechanical or with electrostatic air cleaners. It is possible to use activated carbon, but for economic reasons this is not always advisable.

It is absolutely essential to ensure that rooms are sufficiently ventilated with a fresh air supply to prevent the humidity and gas concentration in the rooms from growing too high.

THE ANSWER

Using NOVUS products with oil mists and aerosols

It is recommended to use air cleaners for individual machines combined with room air cleaning. From a filtering unit with pipework to a plug-and-play filter tower, our product range offers various solutions.

AIRTOWER M

Oil mist and aerosol extraction

AIRTOWER M

The Airtower M is our plug-and-play device used to purify the production hall air from emissions arising from cutting fluids and aerosols. Read more about its construction and functioning on the product page.

NOVUS AIRTOWER

AIR M-LINE

Modular fine dust extraction

AIR M-LINE

The Air-M-Line is part of the Air-Line family and has been developed with a focus on a modular design and the efficient extraction of fine and ultrafine dusts. Read more about its construction and functioning on the product page.

NOVUS AIR-LINE

PRODUCT OVERVIEW

 

 

 

 

 

READ MORE

PRODUCT OVERVIEW

NOVUS offers a comprehensive product portfolio ranging from plug & play devices to customer-specific centralised or decentralised extraction systems, from best selling line to custom units and attachments.

OPEN OVERVIEW

THE APPLICATION

Where oil and aerosol mists arise

Among other things, fumes and mists arise from using cutting coolants when machining metals (cutting, sawing, milling, drilling or turning). Their extraction is therefore essential in the following sectors of industry.

THE CONCLUSION Convinced?

Extraction of oil mist and aerosols should fit the requirements of the respective industry and the amount of the materials to be extracted. Our national and international sales team is pleased to advise you individually and to answer your questions. To receive more information on our products or our services, simply click on the respective link.